Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque output is required. Great for student based projects including robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap fitted into its cradle to engage the apparatus and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at very low voltages. We recommend that you utilize stall-detection sensors, or simply view your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new standards for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration now and a truly future proof option. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in substitute positions rotated in 90º steps around the engine frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a corner turn, optional dual result, or an inability for the electric motor to be back driven. The DC right angle gear motors are made for constant and intermittent duty procedure. Our right angle equipment reducers were created with a number of mounting plate choices, making them well suited for a variety of DC engine based applications. You can expect 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a small package size. Worm Equipment Motors are great for applications that require a personal- locking or breaking feature because the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
Security Door Locks / Industrial Conveying Systems / Security Gates / Teeth Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Items will continue to work with you to create and produce a Worm Gear Electric motor which will optimize the overall performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm electric motor runs on the metal gear box for durability and a high torque output. Due to the special mechanical framework of the worm drive the engine output shaft is self locking and may not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – worm motor Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their power in applications where high gear ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions allow simple and effective cleaning of the drive system.
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to meet your needs.
Worm gear units impress with their high power density and small style. If required, we can also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These can be quickly field set up, but we will also be glad to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm equipment unit SMI
SMI worm gear products feature a simple, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have on all sides different fixing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are created in light weight structure out of aluminium die cast. Electric motor attachment is realised in general by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most suitable for applications where an easy to match, high torque output is required, nylon housing and gear, requires light essential oil or silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque output is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
The motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, regarding motor without electrical, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option compared to the spur gear motor. How come worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when working with large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (one spiral) worm is used. This is often a advantage when it’s desired to get rid of any probability of the result driving the input.”
In other words, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor