Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is intended to operate materials managing tools. The decreasing movement is achived by the solenoid valve together with the lowering speed managed by an adjustable needle valve. The left and right functions are outfitted having a dual pilot operated examine valve and cross-over relief valves.
Remark: Please consult our product sales engineer for that unique pump displacement, motor power or tank capability.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities.N46 hydraulic oil is suggested.
four. This electrical power unit needs to be mounted horizontal.
five. Check the oil level during the tank immediately after the 1st start out of your energy unit.
six. Oil transforming is required immediately after the first a hundred operation hrs, afterwards the moment every single 3000 hours.
SNOW PLOW Power UNIT