This EPT one-piece clamping shaft collar includes a quick-clamping design and is constructed of anodized aluminum. This is a one-part clamping shaft collar for applications needing a far more uniform holding electric power and higher axial load ability than setscrew collars. It is easier to take out and reposition than setscrew collars and works well on both hard and smooth shafts. This collar includes a quick-clamping design for making frequent adjustments utilizing a lever handle rather than tools. It is suited to applications that want quick alterations and procedure tuning such as for example adjusting instruction rails or locating parts. It is manufactured from aluminum with an anodized complete that increases the metal’s use and corrosion tolerant properties and boosts its surface hardness, holding electrical power, and physical appearance. This collar posseses an aluminum lever deal with with a gold anodized finish for quick installation and discharge of the collar. The operating temperatures for this collar range from -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is suitable for use in a variety of applications, which include in the motor vehicle industry to situate pieces in automobile vitality steering assemblies, the developing industry to locate elements on a conveyor belt program, and the hobby craft industry to hold tires on axles in handy remote control vehicles, among others.
Shaft collars happen to be ring-shaped devices generally used to secure pieces onto shafts. In addition they serve as locators, mechanical stops, and spacers between various other components. The two fundamental types of shaft collars are clamping (or split) collars, that can come in one- or two-piece patterns, and setscrew collars. In both types, one or more screws contain the collars set up on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws happen to be tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-part clamping collars should be set up by sliding the collar over the finish of the shaft, while two-piece clamping collars independent into two halves and may be installed between pieces on the shaft. Shaft collars are produced from a broad range of materials including zinc-plated metal, lightweight aluminum, nylon, and neoprene. Found in nearly all sorts of machinery and sector, shaft collars are being used in applications including gearbox assemblies, motor bases, machine tools, travel shafts, agricultural implements, medical apparatus, and paper and steel mill equipment, among others.
EPT manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Chemicals (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemical substances (REACH) standards.

One-piece clamping shaft collar for applications requiring a more uniform holding ability and bigger axial load capability than setscrew collars
Quick-clamping collar design for making frequent adjustments without tools
Aluminum with an anodized surface finish for greater corrosion level of resistance, wear resistance, and area hardness than plain aluminum
Includes an lightweight aluminum lever cope with with a precious metal anodized finish for speedy installation and relieve of the collar
Operating temperatures range from -40 to 93 degrees C (-40 to 200 degrees F)
Among the simplest and therefore most overlooked pieces in the energy transmission industry may be the shaft collar. On the other hand, the importance of the shaft collar is certainly demonstrated through the widespread utilization of these parts. Shaft collars are Shaft Clamp china available in virtually any sort of equipment. They are used by themselves for several applications, which include mechanical stops, locating pieces and bearing faces, and are frequently accessories to different pieces to create assemblies for most types of power tranny equipment including motors and gearboxes.