The two speeds mostly used in combination with tractor PTO shafts is 540 and 1000 rpm and the PTO shafts can come in several sizes and lengths. PTO Shaft, Series 4, 1-3/8 In.

: Over-running clutches provide a safe methods to protect operators and pricey machinery from scenarios when the inertia of PTO driven implement exceeds and over-runs the tractor PTO speed. In such a case, the over-jogging coupler will free-wheel
smoothly and properly. Over-jogging clutches will normally tolerate applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or travel line angularity will reduce this capability
If the length of your PTO will not fit flawlessly within a tractor, a PTO adapter can extend the size and never have to replace it for a fresh one. This adapter has an overall length of 7-3/16″ with a man end 1-3/8″ x 6 Pto Adapter china spline and a female 1-3/8″ x 6 spline end.
Create additional length on the finish of your PTO. This tractor PTO shaft adapter offers both a female 6 spline end and a male 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection choices and is ideal for anyone that owns a mature tractor because the older parts may not be produced any more and are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run driving source. The coupler drives solidly from tractor to implement and free wheels effortlessly when apply exceeds tractor PTO speeds. All dimensions are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Essential with 1000 RPM gearcase upgrade or Three Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It really is easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall amount of 6-3/8″ and is ranked for tractors up to 70 HP.
Reduces PTO from 1 3/8″ x 21 spline to 1 1 3/8″ x 6 spline and extends the PTO shaft 4 1/8″
Ever-Power presents two adapters that will help pairing old or perhaps new attachments with good old or new tractors.
Ever-Ability changed the PTO configuration on their two-wheel tractors from a splined shaft to a 3-jaw shaft.
A electrical power take-off or electric power takeoff (PTO) is any of several methods for taking electric power from a power source, such as a running engine, and transmitting it to an application such as for example an attached implement or split machines.

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (makes 20 to 40 HP from the power take off)
• You don’t need to modify ability take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with electric motor, hydraulic hoses and flat faced couplers
• Perfect for three point vitality take off products – snow blowers, mowers, tillers, post hole augers, etc