Single and dual reduction planetary equipment drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high speed, low torque sources to deliver decreased speeds at increased torques. The input side has regular SAE pads for motor mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an integral parking brake.
One reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output side has hub for installation vehicle wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.
Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed round, hexed, hydraulic planetary drive hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth due to wear. The external bearing nut provides the best in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of essential pinion gears.