Single and double reduction planetary equipment drives to be used with electric, hydraulic, surroundings motors or mechanical power insight from high acceleration, low torque sources to deliver decreased speeds at increased torques. The input part has standard SAE pads for engine mounting. Obtainable in the three output configurations demonstrated below. Many units can be furnished with an integral parking brake.
One reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is bound to 2500 RPM.The same torque is available in either direction of Plastic Gear Rack rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmission efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for installation vehicle wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and temperature treated ring equipment to reduce backlash growth due to wear. The exterior bearing nut provides the supreme in shaft retention and shaft strength. Output can be a spindle shaft or various sizes of integral pinion gears.