Large power roller chains with improved fatigue power and influence strength
HI-PWR-S roller chains are enhanced in fatigue power and effect strength with no changing the dimension in the pin length route of typical roller chains. Plates are enlarged, as well as machining accuracy and assembling accuracy of elements are enhanced. The roller chains hold higher transmission efficiency for applications from very low to higher speeds and therefore are potent adequate to withstand long-term use.
Encouraged utilizes
?In contrast to common roller chains, HI-PWR-S roller chains are larger in greatest kilowatt rating by about thirty percent inside a medium to lower velocity selection. They exhibit fantastic capability in areas exactly where significant shock loads are utilized, drive units for regular start/stop, and in addition in high speed applications.

?Civil engineering machines such as skid steer, trenchers, trucks, cranes, agitating trucks, forklifts and drive units for conveyors, elevators, stackers, and so on.
Collection of chains
Normally, choose your chain with reference to “Designing of Chain Transmission” as well as towards the tables of “Drive Performance” and “Dimensions” of HI-PWR-S sort roller chains.Even so, only for any particular case of lower pace and much less shock, “Low-speed selection” can also be applicable.
HI-PWR-S Roller chains and ANSI conventional chains would be the same in essential dimensions. Use ANSI common sprockets.
Connecting hyperlinks and offset back links
Use H connecting backlinks for HI-PWR-S. In an H connecting hyperlink, the pins are lightly interference-fitted with all the connecting plate. For that connection amongst the connecting plate along with the connecting pins, spring pins are employed as opposed to cotter pins for any standard roller chain.
The center plates of an H connecting link for multiplex chain has bushings pressed in.
HI-PWR-S roller chains will not have any offset link. Use an even amount of hyperlinks.
Never ever make the holes with the connecting plate greater and never ever make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, due to the fact otherwise the fatigue strength are going to be lowered.