The EP Greenhouse geared motor is a concise and lightweight reduction reducer with a built-in limit switch system that is suitable for assembly of a locally available electric motor. The gearbox is used in manually-controlled or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gear driver is usually rainproof and windproof. The gear driver includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise gear motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is definitely locked when the decrease gear motor is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all situations, even at high temperatures. Thanks to the usage of an growth chamber, the gearbox could be installed in any position. There are no restrictions, since there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the apparatus essential oil of the reducer in optimal condition for its entire operating lifetime. The gearbox is ideal for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear driver has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an included chamber and can be enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).