Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical option where a large gear is necessary or an extended stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. We offer a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is certainly applied just within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Heat treated floor gears with high precision and power has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large selections of modules and number of the teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and amount of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of tooth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where metal racks do no possess this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guide Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres long. Stainless Steel and Delrin (Plastic) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on request. Moulded Hostaform Racks can be found to offer an economical alternative where much less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a flexible rack and gear, a rotational joint actuator called vsaFGR is usually proposed to regulate the joint stiffness. The flexible gear rack could be regarded as a combination of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible equipment rack is usually perpendicular to the joint loading power, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive of up to approx 270 degrees for example on camera focus rings. They also offer an economical answer where a large gear is necessary or an extended stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing can be applied only within the tooth area. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Heat treated floor gears with high precision and strength has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack made of Chromoly steel, treated simply by carburizing. Has high-strength, high wear level of resistance, and allows downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and encounter width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and number of the teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and amount of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and quantity of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications because of its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Information Rails (ARL) : Guide Rails for Molder Flexible Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres in length. Stainless Steel and Delrin (Plastic-type material) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on request. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a flexible rack and equipment, a rotational joint actuator called vsaFGR is proposed to modify the joint stiffness. The versatile gear rack could be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is certainly in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible gear rack is definitely perpendicular to the joint loading power, so the power required for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.