FHDFS Style Floating Shaft Couplings
The FHDFS Kind coupling consists of two flex-rigid couplings and a single floating shaft. The coupling is supplied with all the rigid hubs outboard unless of course otherwise specified. The coupling comes with exposed bolts only.
Characteristics
Flex Hubs for prolonged life
Common 20° stress angle
Heat handled bolts for better power
Corrosion resistant bolts and nuts for ease of upkeep
Accommodates parallel and angular misalignment
Removal of center assembly allows forease of upkeep with no repositioning machinery
Rigid hubs outboard lets for greater shaft diameters
Designed for high-torque low-speed applications that happen in mill operations
Ordering Details
Application: Driver and Driven.
Kind and size of coupling, horizontal, 
vertical and so forth.
Electrical power: Motor horspower or torque requirement.
Velocity: Motor RPM or Driven RPM.
Distance concerning shaft ends (BSE).
Connecting products shaft sizes.
Specify which hubs are to become utilized within the equipment (Rigid or Flex).
Rigid hubs might be made use of over the tools unless otherwise specified.
Length of floating shaft might influence max angular misalignment.
FMM Type Mill Couplings
The FMM Style coupling consists of a single common flex hub, one particular universal straight bored hub as conventional, two sleeves and one accessory kit. This coupling is provided with exposed bolts as regular. Shrouded bolts can be found upon request by dimension 5.5.
Attributes
For prolonged existence
Typical 20° strain angle
Heat taken care of bolts for higher strength
Corrosion resistant bolts and nuts for ease of upkeep
Provides parallel, angular misalignment and finish float
Flex Half coupling interchangeable with business requirements
Extended Universal Hub provided to client specifications with straight or tapered bores
Ordering Data
Application: Driver and Driven.
Kind and dimension of coupling, horizontal, vertical and so forth.
Energy: Motor horspower or torque requirement.
Velocity: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is needed.
Specify counterbore dimensions if desired.
Submit a drawing if readily available.