Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Find “Control electric fan motor china Notice” below for alter type.)
T (See “Program Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you possess a pull-chain). If you order several electric motor at the same time, we will do our best to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan software. This is a completely enclosed fan electric electric motor and designed to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electric engine will overheat and enter automated thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and lead it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade position.)
Origin: This electric electric motor is manufactured in China.