China Best Sales China-Made-High-Quality UL/FM/CE Listed Fire-Protection Ductile Iron Grooved Pipe Fitting Reducer//Elbow/Coupling

Product Description

LAMAT PIPING – Ductile Iron Grooved Fittings
Name Rigid coupling, Flexible coupling, 90° Elbow, 45° Elbow, 22.5° Elbow, 11.25° Elbow, Split Flange, Adaptor Flange, Cap
Tee, Reducing Tee(Grooved/Threaded), Mechnical Tee(Grooved/Threaded), U-bolted Mechnical Tee
Cross, Reducing Cross(Grooved/Threaded), Mechnical Cross(Grooved/Threaded)
Reducer(Grooved/Threaded), Grooved Eccentric Reducer
H.S. CODE 735710000
Technology Casting
Connections Grooved-Thread End, Grooved End
Pressure Rate 300PSI / 2.07MPa
Size 1” – 12”
Pipe O.D. 33.7MM – 323.9MM
Surface Finish Epoxy Powder,Painting,Galvanization,Dacromet (in Red/Orange/Blue/White Color)
Design Standard American Standard ANSI/ASTM
European Standard EN
British Standard BS
Germany Standard DIN
Japanese Standard JIS
ISO Standard ISO
Thread Standard ASME B.1.20.1 / EN15716 / DIN2999 / ISO7-1 / ISO228 / IS554 / BS EN15716 / BS 21.173
Material Standard Ductile Iron confirms to ASTM A-536 Gr65-45-12,EN1563,JIS G5502,QT450-12
Gasket Material EPDM,NBR or Silicon Rubber
Bolts & Nuts ISO 898-1class 8.8
Flanges Standard PN series or Class series
Packages Plywood Cases or Plywood Pallets or Boxes
Application Fire Fighting System,Petrochemical & Gas Industry,Chemical,Machinery,Electric Power,Construction Water Works,Valve Industry,etc.
Advantages High Quality + Ready Stock + Faster Delivery + Customized
Brand LMP
Certificate ISO9001,API,CE,UL/FM

 

Products Details

 

Factory & Workshop Show

 

Company Profile

WHO WE ARE

Lamat Piping established in 2002s,is 1 of China’s leading piping manufacturing and exporting suppliers,specialized in qualified steel flanges, butt weld pipe fittings and malleable cast iron fittings for clients from over 60 countries and regions worldwide.

Lamat Piping is the single and independent exporting department of NPCC(National Piping Construction Cooperation),who is a group company with 5 factories located in ZheJiang and ZheJiang , where the regions have very long histories in manufacturing Steel & Iron products dating back to 1990s. CHINAMFG Piping(NPCC) aims to combine and intergrade some leading and high quality industries to become a modern and international piping supplier in the new century. Now we have more than 30 producing and machining lines with over 1000 normal workers and 80 technical employees. Our factories covers over 300,000 square meters,and has an annual output of 500,000Tons.

WHAT WE PRODUCE

Lamat Piping(NPCC) is producing flanges from 1/2” to 144” – Standards including ASTM B16.5, EN1092-1, BS4504, BS10, SANS1123, DIN, JIS, UNI, GOST, KS, AS, etc. Products including Plate Flanges FF/RF, Slip On Flanges FF/RF, Blind Flanges FF/RF, Welding Neck Flanges, Screwed Flange, Socketed Flanges, Lap Joint Flanges,Backing Rings Flanges,etc. Pressures includes 150LBS to 2500LBS in ASTM B16.5,PN6(T6/3/4/8) to PN100(T100/3/4/8) in EN1092-1/BS4504/BS10, T600/3/4/8 to T4000/3/4/8 in SANS1123.

Lamat Piping(NPCC) is producing butt weld fittings from 1/2” to 144” – Standards including ASTM B16.9, JIS B2311, EN15713, DIN, GOST…etc. Products including 45/90/180 Degree Short/Long Radius Elbow,Equal/Reducing Tee,Cross,Concentric/Eccentric Reducer,End Cap.

Lamat Piping(NPCC) is also producing malleable cast iron fittings from 1/2” to 6” – Standards ASME B16.3, ASME B16.14,BS EN15712,BS1256,DIN2950, BNR6943, ISO49,etc. Products including Elbow,Bend,Tee,Socket,Nipple,Bushing,Union,Cap,Plug,Back Nut.

WHAT WE SOURCE

With 30+ years constant efforts and experience,now CHINAMFG Piping(NPCC) has become our customers’ expert manufacturer and supplier for a very wide range of piping products.And today CHINAMFG Piping is not only supplying Flanges,BW fittings & Malleable Iron Fittings produced by ourselves,but also sourcing and exporting various Pipe Fittings & Valves s from China’s leading industries,including Cast Iron Valves, Ductile Iron Pipe Fitting, Stainless Steel 1,2,3PC Ball Valve, Stainless Steel 150LBS NPT/BSP Fittings, Wrought Steel Fittings,Grooved Fittings,Forged Steel Fittings,HDPE Pipes Fittings Valves,PVC Pipes Fittings Valves, Brass Valves Fittings,etc.

WHAT WE PROMISE

”BETTER QUALITY, BETTER SERVICES” is our promise to all of our customers and ”CREATE VALUE FOR CUSTOMERS” is our ultimate goal. CHINAMFG Piping promises that we’ll continue to put quality in the first place;besides,we will not lose our fixed-focus on the service aspect of our business,which has been,and will continue to be the foundation of our success and our future growth.

WHAT YOU CHOOSE

If you’d like to trust CHINAMFG Piping,Lamat people will do the best to be worthy of your trust!

 

Producing Process & Inspection

 

Pipeline System Application

 

Packaging & Shipping

FAQ

Q0: Are you a factory or trading company?
A: We are a factory mainly producing pipe fittings & flanges. We also have cooperated factories to supply other piping products.
 
Q1: How do your Control the Quality?
A: We have QA & QC department who will follow up all the producing process to make sure we’re supplying correctly.
 
Q2: What Machines are you using for Manufacturing and Machining?
A: We have Forging/Stamping Machine,CNC Machine,Hole-Drilling Machine,Sandblasting Machine. All producing is in our factory except Galvanization.
 
Q3: Can we get Samples for Testing?
A: Yes,sapmles are supplied free of charge.
 
Q4: Can you accept OEM & marking our LOGO?
A: Yes,no problem if you can provide Authorization.
 
Q5: Can you offer Drawings & Datasheets?
A: Yes,Drawings & Datasheets will be sent for your confirmation before Bulk Production.
 
Q6: Can you supply MTC with EN15714 3.1/3.2 Certificate?
A: Yes,MTC will be provided after production is finished.
 
Q7: Can we visit your factory to inspect the goods before delivery?
A: Yes sure. Welcome to our factory,and we also accept Third Party Inspection like SGS,TUV,BV,etc.
 
Q8: Can you combine goods from our other suppliers to ship together?
A: Yes,we’d like to assist you to ship together to save your time and money.
 
Q9: How long is your Delivery Time?
A: It depends on quantity and products. It can be delivered in 1 week if we have Ready-Stock; if not,the General Production Time is 25 – 50 Days.
 
Q10: What’s your Payment Terms?
A: Currently we’re working with our clients under T/T,L/C,O/A,Western Union,etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

reducer coupling

How to Properly Install and Secure a Reducer Coupling to Prevent Leaks

Proper installation and secure fastening of a reducer coupling are crucial to prevent leaks and ensure the integrity of the plumbing or piping system. Here are the steps to follow when installing a reducer coupling:

  1. Prepare the Pipes: Before installing the reducer coupling, ensure that the ends of both pipes are clean, smooth, and free from any debris or burrs. Use a pipe cutter or a hacksaw to achieve clean cuts.
  2. Apply Primer (For Plastic Pipes): If you are working with plastic pipes like PVC or CPVC, use a pipe primer to clean and prepare the pipe ends. The primer helps in removing dirt and contaminants while promoting proper adhesion of the solvent cement.
  3. Apply Solvent Cement (For Plastic Pipes): After priming (if required), apply a layer of solvent cement to the outside of one pipe end and the inside of the reducer coupling socket. Make sure to use the appropriate cement compatible with the pipe material.
  4. Align the Pipes: Insert one pipe end into the socket of the reducer coupling, ensuring that it is fully seated. Make sure the pipes are aligned properly, and there is no gap between the pipe end and the coupling socket.
  5. Mark the Joint: Use a marker to mark the joint between the pipe and the coupling. This will serve as a reference point for proper insertion during the final assembly.
  6. Secure the Coupling: If the reducer coupling has a slip-on design, push the coupling towards the marked joint until it is fully seated. For threaded reducer couplings, thread the coupling onto one of the pipes, ensuring a tight fit.
  7. Tighten the Fasteners: If the reducer coupling has fasteners, such as nuts and bolts, tighten them securely to create a leak-resistant seal between the coupling and the pipes. Use the appropriate tools to achieve the recommended torque.
  8. Inspect for Leaks: After installation, inspect the joint and the surrounding area for any signs of leaks. Turn on the water supply or the fluid being conveyed and check for any drips or seepage.
  9. Allow Cure Time (For Plastic Pipes): If you used solvent cement for plastic pipes, allow sufficient time for the cement to cure before subjecting the joint to pressure or stress. Follow the manufacturer’s instructions for cure time.

It is essential to follow the manufacturer’s guidelines and best practices for the specific type of reducer coupling and pipe material being used. Proper installation and secure fastening will help ensure a leak-free connection and maintain the overall integrity of the plumbing or piping system.

reducer coupling

Potential Limitations or Drawbacks of Using a Reducer Coupling

While reducer couplings are commonly used and offer advantages in certain applications, they also have some limitations and drawbacks that should be considered:

  • Flow Restrictions: Reducer couplings may create flow restrictions due to the change in pipe diameter, which can lead to increased pressure drop and reduced flow rates in the system.
  • Pressure Loss: When fluid flows through a reducer coupling, there is a pressure loss associated with the change in diameter. This pressure loss can impact the overall system performance, especially in high-pressure applications.
  • Mechanical Stress: The transition from a larger to a smaller pipe diameter in a reducer coupling can cause mechanical stress and turbulence in the fluid flow, potentially leading to fatigue and premature wear in the system.
  • Corrosion and Material Compatibility: If the reducer coupling material is not compatible with the materials of the connected pipes, it can lead to galvanic corrosion and deterioration of the coupling, reducing its lifespan.
  • Space Considerations: Reducer couplings add length to the pipeline due to their tapered design, which may require more space for installation and can be a constraint in compact or crowded installations.
  • Thermal Expansion: Differences in thermal expansion coefficients between the pipe materials and the reducer coupling material can cause stress and potential leaks at the joints during temperature variations.
  • Flow Turbulence: The abrupt change in pipe diameter at the reducer coupling can induce flow turbulence, affecting the efficiency of the fluid transport system.
  • Cost: In some cases, using a reducer coupling may require additional material and labor costs for installation, especially when transitioning between pipes of significantly different diameters.
  • Disassembly Difficulty: In situations where maintenance or repairs are required, disassembling a reducer coupling can be more challenging compared to other types of pipe fittings, particularly if it is permanently welded or glued.
  • Limitation in Transitioning Pipe Materials: Reducer couplings may not be suitable for transitioning between pipes with vastly different materials due to potential corrosion or compatibility issues.

Despite these limitations, reducer couplings remain valuable components for connecting pipes of different diameters in plumbing and piping systems. It is essential to carefully consider the specific requirements and challenges of the application to determine whether a reducer coupling is the best choice or if other types of pipe fittings would be more suitable.

reducer coupling

What are the Standard Sizes and Dimensions of Reducer Couplings?

Reducer couplings come in a variety of standard sizes and dimensions to accommodate different pipe diameters. The sizes and dimensions of reducer couplings are typically specified in terms of the nominal pipe size (NPS) and the outside diameter (OD) of the pipe.

For example, a common type of reducer coupling is a “concentric reducer,” where the center axis of the two pipe ends remains in line. The standard sizes of concentric reducer couplings include:

  • 1/2″ x 1/4″ NPS
  • 3/4″ x 1/2″ NPS
  • 1″ x 3/4″ NPS
  • 1-1/4″ x 1″ NPS
  • 1-1/2″ x 1-1/4″ NPS
  • 2″ x 1-1/2″ NPS
  • 2-1/2″ x 2″ NPS
  • 3″ x 2-1/2″ NPS
  • 4″ x 3″ NPS
  • 6″ x 4″ NPS
  • 8″ x 6″ NPS
  • 10″ x 8″ NPS
  • 12″ x 10″ NPS

It’s important to note that the dimensions of the reducer coupling, including the overall length and the transition length, may vary depending on the specific manufacturer and industry standards. The dimensions of reducer couplings are designed to ensure a proper fit between pipes of different sizes, allowing for a smooth flow transition without abrupt changes that could lead to turbulence or pressure loss.

Additionally, reducer couplings are available in various materials, such as PVC, CPVC, stainless steel, brass, and copper, to suit the compatibility requirements of different pipe materials and applications.

Before selecting a reducer coupling for a specific application, it is crucial to consider the pipe sizes, material compatibility, pressure and temperature ratings, and the joining method to ensure a proper and secure fit for the plumbing or piping system.

China Best Sales China-Made-High-Quality UL/FM/CE Listed Fire-Protection Ductile Iron Grooved Pipe Fitting Reducer//Elbow/Coupling  China Best Sales China-Made-High-Quality UL/FM/CE Listed Fire-Protection Ductile Iron Grooved Pipe Fitting Reducer//Elbow/Coupling
editor by CX 2024-03-07


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *