TF Sort Flanges
Model TF flanges are made from the identical high-strength cast iron as the S flanges, but are built to accommodate the international typical Taper Lock bushing for simple set up and removal
TF Kind flanges permit for mounting the bushing around the front (hub) side with the flange
TF flanges are available in sizes six by way of 16 and can be utilised with any type of sleeve as pictured on page SF-5
TR Variety Flanges
TR flanges are related towards the TF fashion, but allow for that Taper Lock Bushing to become mounted and eliminated from
the reverse or serration side of the flange
The restricted torque ratings of your Taper Lock Bushings permit TR flanges to only be used with EPDM or Neoprene sleeves
Different bushing sizes are utilised, so they’ve distinct maximum bores compared to the TF flanges
Sizes six as a result of 16 can be found
Taper-Lock Bushings
The field conventional taper lock bushing is a split design permitting a compression match of your flange to the shaft with out set screws
The easy layout makes the installation and elimination simple while the 8° taper grips tight and presents outstanding concentricity
A Lowered degree of stock is often accomplished because of the many other power transmission components that use Taper Lock Bushings like: sheaves, sprockets, and pulleys
will not offer you the Taper-Lock Bushings themselves as they’re extensively available from other manufacturers