Highest wear resistance out there by sealing grease between pins and bushings
The durability of chain is radically improved because grease is sealed amongst the pins and bushings by O-rings. The O-ring chain is definitely the most dependable model of your Greatest Life Chain Series with its exceptional put on resistance even in the ailments or environments where chain servicing is complicated.
Advised employs.
?Circumstances where frequent chain replacement is needed because of put on stretch
?Situations in which lubrication throughout the support is not possible
?In an setting with significantly soil, sand, dust, and so on.
?Applications that require power larger than that of the sintered bushing roller chain
Other attributes
?Lowering noise. (The noise degree is three dB reduced compared to normal roller chains.)
?Lowering vibration using the friction developed by O-Ring. (The electrical power loss due to the friction is nearly negligible, since the frictional force between the pins and bushings is for typically inside the applications.)
Choice of chains
The strength of an O-ring chain is nearly the same as that of the common roller chain. (Since the pins are longer than these of typical roller chain, the average rupture strength is somewhat reduced.)
For choosing a suitable chain, refer to “Selection of Chains” .
Once the support ambient temperature is greater than 80° C, specific heat resistant O-rings needs to be employed. In this instance, make contact with us for extra info.
Connecting backlinks and offset links
Two varieties of connecting hyperlinks can be found: clearance fit and interference match. When higher power or sturdiness is needed, use interference-fit connecting website link. Only 2POJ is available because the offset website link for all sizes.
Sprockets
O-ring chain makes use of longer pins than a conventional roller chain. When making use of multiplex O-ring chain, the regular sprocket for multiplex chains can’t be made use of.
Caution
O-ring chain is just not advisable in applications where solvents or other substances may assault “Nitric Rubber”. Specific material O-rings can also be obtainable for these problems: Please seek the advice of us for particulars. Normally, “Nitric Rubber” is broken by get in touch with using the following chemical resources.