Material Handling Electrical power UNIT two
This energy unit attributes electrical power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing velocity controlled through the strain compensated movement management valve. Solutions of this series is often widely utilized in the business of logistic gadgets which include fork lift, mini lift table, and so forth.
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned ahead of mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of impurities, N46 hydraulic oil is advised .
4. Oil modifying is needed after the original a hundred operation hrs,afterwards once every 3000 hours.
5. The energy unit needs to be mounted horizontally.
Material Dealing with Electrical power UNIT one
This energy unit is made for the fork lift sector, consisting of extremely effective gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are managed by the lever of the manual release valve, which is equipped with an electrical switch to activate the motor. The lowing velocity is managed from the pressure compensated movement control valve.
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic components concerned prior to installation of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil transforming is needed following the first a hundred operation hours, afterwards after every 3000 hrs.
five. The energy unit shown is designed to be mounted horizontally.