1.A connecting website link of an O-ring Chain for common application is pre-coated with grease in the pins. In advance of connection, verify the grease to the surfaces of pins, and in the event the quantity of grease is little, apply grease with bare hands. (If gloves are utilized, the grease will likely be absorbed by the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted with the roots from the pins. When the O-rings come loose as a result of vibration throughout transport, refit the O-rings in on the roots from the pins.
In this instance, be sure you return the grease collected in the roots from the pins on the central surfaces in the pins, much more at portion A than at portions B proven from the above illustration. (Portions A is worn due to sliding with the bushings.)
two.The chain could be most quickly connected within the teeth of the sprocket. Engage the hyperlinks at both ends of the chain with all the sprocket teeth and fit connecting pins. In the event the sprocket may be moved, the chain may also be linked over the loosened side.
3. Connecting method
one.Verify that O-rings are attached to the roots in the pins.
two.Should the amount of grease applied around the connecting pins is smaller, coat the pins with grease at the central portions.
3.Insert the connecting pins to the bushings of the inner links at the two ends.
4.Verify the grease is utilized on the whole face in the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, set up the spring clip. Verify no matter whether the head (the finish without a split) of the spring clip is turned during the feeding path on the chain. (See the next illustration.)
6.Be sure you verify that the spring clip is securely fitted inside the clip grooves with the connecting pins.
This completes jointing in the connecting link. Note that grease to the surfaces of connecting pins and O-rings can be removed for the duration of installation operate. In this case, re-grease making use of the grease over the surface in the base chain or even the grease while in the polyethylene bag through which the connecting website link was contained.