Any damage to the teeth surfaces of the sprocket diminishes the lifestyle with the conveyor chain.
With typical sprockets, considerably worn sprocket teeth were repaired by teeth padding or even the entire sprocket was replaced. In both situation, repair was costly and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our prospects for your dramatic cost savings in price and time.
Framework
The teeth is usually replaced by two solutions: individual tooth substitute or sectional teeth replacement.
The bolts and nuts used for mounting the teeth on towards the sprocket are spot-welded to stop loosening.
The respective structures are illustrated around the proper.
The over photo and also the leading proper illustration demonstrate a sprocket for personal tooth replacement. Since the joint face between the replaced teeth along with the sprocket is formed within a special arc, the bonding accuracy is high and the sprocket strength is enhanced. On top of that, since the load acting to the mounting bolts is decreased, there may be less chance of loosening. This sprocket development is patented.
There are actually two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for large sprockets acquiring heavy loads and welded sheet steel hubs for other applications.