DC MOTOR PUMP GROUP one
General Description
Consisting of the hefty duty DC motor plus the CB1S gear pump, this pump motor group is surely an perfect hydraulic power unit for mobile hydraulic equipments, this kind of as car or truck carriers, mobile aerial lifts, and backup methods.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and examine valve.
DC MOTOR PUMP GROUP three
Basic Description
This motor pump includes a four.5″ DC motor along with a CBSR gear pump that has a common power up/gravity down circuit having a relief valve, a verify valve plus a solenoid release valve.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned just before mounting the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~68 cst, which need to also be clean and no cost of impurities. N46 hydraulic oil is encouraged.
4. The electrical power unit ought to be mounted horizontally.
5. The relief valve strain is preset about 25% increased than the working pressure.
six. Flow control valve for lowing pace adjustment is obtainable unpon request.